Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

A guide to material selection for rolling bearings

 

selection of steel

By offering a wide choice of materials and heat treatments for rolling bearings, performance and operating life can be optimised, even for the most demanding industrial applications, says Dr Steve Lacey, Engineering Manager at Schaeffler UK.

In recent years, there has been a significant increase in the demand for rolling bearings that, even under extreme operating conditions – including lubricant starvation, highly corrosive or high temperature environments – still provide a long operating life and optimum performance.

But selecting a suitable material or heat treatment process for rolling bearings often requires expert advice and guidance, normally from the manufacturer of the bearings. Selection depends on the application itself and the specific environment in which the bearings will operate. This means a number of factors require careful consideration, such as the mechanical, chemical and thermal requirements placed on the bearings, as well as lubrication conditions, particularly if the application requires dry running bearings.

There is a key role here for the type of materials used for the various bearing components (i.e. rings, rolling elements, cage, etc.) and how these interact. Some of these materials are industry-recognised standard steels (in rolling bearing quality), but others may need to be specially developed by the manufacturer or might involve special surface or heat treatment processes to give the material a certain set of characteristics that are deemed critical for a certain application.

Standard rolling bearing steels

For most industrial applications, standard through hardened rolling bearing steel (100Cr6) is sufficient. This versatile material is heat treated (martensitic-hardened and tempered at low temperatures), which provides consistently high hardness (between 62 and 64 HRC) distributed over the circumference and cross-section. The main attributes of this material are high hardness and wear resistance, as well as good resistance to over-rolling (solid particles can produce surface indentations of raceways in rolling-sliding lubricated contacts).

Depending on the wall thickness of the components, it may be necessary to use a higher-grade alloy taking account of hardenability. The material also permits operating temperatures up to 120 deg C, with some grades offering up to 200 deg C. Typical applications include small combustion engines and fan bearings for steel mills.

A slight variation on the above is bainitic hardened 100Cr6 steel. With this material, there is a considerable reduction in the risk of crack formation, even with surface damage. Typical applications for these bearings include wheelset bearings for bucket wheel excavators and trams.

Case hardened steel (St4) in rolling bearing quality has good forming characteristics and provides high hardness and wear resistance, as well as good resistance to over-rolling. This material is well suited to small components that are manufactured in high volumes, such as universal joints, drawn cup needle roller bearings with closed ends and swing arm bearings.

If there is a high risk of particle over-rolling and poor lubricating conditions (e.g. refrigerating compressors, gearbox bearings for construction/agricultural machinery), carbonitrided steel (100CrMnSi6-4) is the preferred choice. This material is heat treated to provide excellent dimensional stability and hardness up to 66 HRC in the outer functional layer by using increased residual austenite content. The result is a material that provides higher resistance to surface damage and high wear resistance, leading to extended bearing life in poor lubrication conditions, especially where there is a high risk of contamination.

Wind turbines & trucks

Used primarily for medium and large sized rolling bearings, including wind turbine main rotor bearings and wheelset bearings for heavy-duty trucks, case hardened (carburised and martensitic hardened) steel offers hardness up to 64 HRC in the form of a hard surface layer with a tough core. This treatment provides residual compressive stresses in the surface layer, providing increased fracture resistance under shock type loads or surface damage, as well as reduced crack formation with surface damage.

Nitrogen alloyed chromium steel (e.g. Schaeffler’s Cronidur® 30) is a material that is martensitic hardened and tempered at low (or possibly high) temperature. This material provides excellent corrosion resistance, particularly against aggressive chemicals and acids. Operating temperatures are typically up to 150 deg C. Main areas of application are bearings that are subjected to high loads, lubricant starvation, dry running, media lubrication and corrosive environments. Examples include spindle bearings for machine tools and bearings for process pumps.

Corrosion resistant, case hardened steel (surface layer nitriding) provides rolling bearings with even better resistance to corrosion and significantly improves resistance to over-rolling. Schaeffler’s Cronitect® steel, for example, has found numerous applications in food processing (e.g. bottle filling plants), as well as in sports and fitness applications (e.g. inline roller skates and gym equipment).

Special Materials

Often bearings manufacturers are required to provide special materials and heat treatments for certain applications or industry sectors. The aerospace sector, for example, specifies M50 steel (martensitic hardened) for many applications such as main shaft bearings and turbine rotor bearings on aircraft engines. This material provides excellent thermal stability (up to 400 deg C) and increased toughness, even at high bearing operating speeds. Offering even higher hardness (up to 70 HRC) are duplex hardened M50NiL steels. These are used if the bearings are subjected to high loads, very high rotational speeds and if a high tolerance to damage is required.

Where current insulation and high wear resistance are important considerations, oxide-based ceramics (e.g. zirconium oxide ZrO2) are ideal. These sintered materials can be used in temperatures up to 600 deg C, with typical hardness ratings in the region of 1400 HV and a density between Si3N4 and steel. The material is normally only used for the rolling elements that are in contact with steel-based bearing rings. Main areas of application are where the bearings are subjected to low loads (hybrid bearings), lubricant starvation, dry running, media lubrication and corrosive environments (e.g. electric motors for car windows).

In certain food processing applications and for machine tool spindle bearings, silicon nitride-based ceramic rolling elements can be specified. The technical advantages of this material include its reduced mass and ability to withstand higher operating temperatures (up to 700 deg C), as well as high speed capacity, current insulation, very high wear resistance, reduced friction and increased grease operating life.

Steel rolling mill bearings and some marine propulsion systems use case hardened rolling bearing steel (to DIN EN 10084). Examples here include 17MnCr5 and 17CrNiMo7-6. These materials are specified if the bearings are subjected to high loads combined with poor lubrication and when there is a high risk of particle over-rolling.

For more information, please call Schaeffler UK’s Marketing Department on 0121 313 5870. Alternatively, email info.uk@schaeffler.com.

 

source: Schaeffler UK

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

무선 진동 분석

무선 진동 분석(0)

PRÜFTECHNIK, VIBCONNECT RF에 새로운 기능 추가 ISMANING – 2014년 3월 25일- 새로운 펌웨어 업데이트를 통해 PRÜFTECHNIK의 무선 온라인 컨디션 모니터링 시스템인 VIBCONNECT RF가 한층 강화됐다. 무선 기술이 장착된 VIBCONNECT RF는 장거리 진동 측정 데이터를 무선으로 전송해야 하는 어플리케이션에 완벽하게 활용될 수 있다. VIBCONNECT RF 의 최신 펌웨어 업데이트는 몇 가지 강력한 특징을 갖는다. 상태 및

진동 측정 장비를 이용한 베어링 윤활처리 모니터링

진동 측정 장비를 이용한 베어링 윤활처리 모니터링(0)

윤활처리된 베어링의 재윤활 시기 자동 연속 윤활 시스템이 점점 더 많은 대형 베어링 들에 장착되고 있지만, 그림 1에서 보여지는 것과 같은 팬에 적용될 경우 비용면에서 효율적이지 않다. 그림 1: 팬 일반적인 팬들은 특정 간격으로 수작업에 의해 윤활처리 되지만, 그렇다면 이런 간격은 얼마나되어야 하는가? PRÜFTECHNIK의 온라인 컨디션 모니터링 시스템이 해답을 제시해 줄 수 있다. 예를 들면,

신뢰성 향상을 위한 윤활 관리

신뢰성 향상을 위한 윤활 관리(0)

공장 내 윤활처리 작업은 공장 뿐만 아니라 기기의 신뢰성에 직접적인 영향을 미친다. 기계 내에서 윤활유가 오염을 최소화 하고, 아무런 화학적 분해없이 효과적으로 작동할 때, 부품의 마모도는 감소하고 기기의 신뢰성은 향상 될 것이다. 마모도 감소와 기기 신뢰성을 향상시키기 위해서는 효과적이고 깨끗한 평균 윤활 막 두께, 즉 좋은 점도를 보호하고 유지하는 것이 가장 중요하다. 윤활 신뢰성이란? 베어링

사례연구: 펌프모터 베어링의 성능 향상

사례연구: 펌프모터 베어링의 성능 향상(0)

이 연구는 STARWOOD Inc.의 수석 엔지니어인 mr.Selcuk Karabay에 의해 진행됐다. 결과: 프레스 기계에 사용되는 핫오일 펌프 모터는 작동온도가 90-100° C에 달했고, 진공 펌프 모터의 경우 100-110° C이며, 작동이 계속적으로 멈추는 현상을 보였다. 또한 높은 작동 온도로 인해 고온의 베어링이 6개월만에 파손되기도 했다. 테스트 핫오일 펌프 모터 테스트 진공 펌프 모터 파손 원인: 상황 분석 후,

볼베어링 & 에저지절약

볼베어링 & 에저지절약(0)

요즘 전 세계적으로, 환경에 미치는 영향을 최소화 하기 위해 그린상품에 대한 수요가 증가되고 있다. 이러 추세는 앞으로도 계속될 전망으로, 기계 및 공장들의 생산능력 향상은 큰 도전과제가 될 것이다. JESA SA는 볼베어링과 폴리머컴포넌트의 설계및 제작에 특화된 회사로써, 성능이 향상된 볼베어링을 제작하기 위한 연구를 시작했으며, 다양한 어플리케이션에 대규모로 사용되는 구성요소들과 깊은 관련이 있어, 잠재적인 에너지 절감이 예상된다.

더보기

문의사항

Social networks

자주찾는 카테고리

Legal Notice

© 2012 BEARING NEWS All rights reserved.