Subscribe to RSS
THE PERFECT BOND BETWEEN BEARINGS AND PLASTIC.
Bearings Units
Miniature Bearings
Standard Bearings
Overmolded Bearings
Custom Bearings
England Germany Russia India Turkey SouthAfrica UnitedStates Netherlands Philippines Belgium Australia Brazil Spain China Korean

Events/Exhibitions back to homepage

NTN Exhibits at the International Trade Fair for Transport Technology “InnoTrans 2012” NTN Exhibits at the International Trade Fair for Transport Technology “InnoTrans 2012”(0)

Date September 18 (Tue) to 21 (Fri), 2012 Venue “The Messe Berlin Exhibition Grounds” Berlin, Germany NTN Booth Booth 133, Hall 22 Link to the official site http://www.innotrans.com The NTN Group will run a booth at the International Trade Fair for Transport Technology “InnoTrans 2012” with the theme “40 years of Experience in Railway, Innovation […]

[ Read More → ]
ABMA Presents Counterfeit Bearing Training at FLETC ABMA Presents Counterfeit Bearing Training at FLETC(0)

In July, ABMA participated in the Commercial Fraud Investigation course at the Federal Law Enforcement Training Center in Glynco, GA which continues to be a great opportunity for educating Customs Officials from numerous ports throughout the country. ABMA also visited the Ports of Savannah, GA and Charleston, SC on the trip. At each location, participants […]

[ Read More → ]
NTN-SNR Exhibits at “Automechanika” the largest automotive aftermarket exhibition in Europe NTN-SNR Exhibits at “Automechanika” the largest automotive aftermarket exhibition in Europe(0)

Date September 11 (Tue) to 16 (Sun), 2012 Venue “Messe Frankfurt”, Frankfurt, Germany NTN-SNR booth Booth A30/B31, Hall 2.0 Link to the official site http://automechanika.messefrankfurt.com/frankfurt/en/besucher/willkommen.html NTN-SNR will run a booth at “Automechanika” the largest automotive aftermarket exhibition in Europe, with the theme “Innovation and R&D” In addition to wheel bearings with sensors, a wide range […]

[ Read More → ]
The 8th Indian Industry fair AMTEX 2012 will be held 27-30 July 2012 The 8th Indian Industry fair AMTEX 2012 will be held 27-30 July 2012(0)

The 8th Indian Industry fair AMTEX 2012 will be held 27-30 July 2012 Please visit http://www.amtex2012.com/ for more information source: BearingNews

[ Read More → ]
ZKL Group participated in FIMAQH 2012 – Argentina ZKL Group participated in FIMAQH 2012 – Argentina(0)

From 29th May to 2nd June 2012 an International Engineering Exhibition FIMAQH 2012, which is held every two years, took place in Buenos Aires. This exhibition introduces local and regional market with the latest news in technology from all around the world, which are applied in the sectors of automation, robotics, technical control and packaging […]

[ Read More → ]
ABMA Expands Bearing Knowledge at Advanced Concepts Course ABMA Expands Bearing Knowledge at Advanced Concepts Course(0)

ABMA’s Advanced Concepts of Bearing Technology course was held June 18-21 at the R. David Thomas Executive Conference Center at Duke University in Durham, NC. The course focused on taking attendee’s bearing knowledge to the next level by concentrating on the following complex topics: • Bearing Macrogeometry: Clearance, Free Contact Angle, Interference Fits • Ball/Roller […]

[ Read More → ]
EPTDA Lisbon 2012 – Annual Convention EPTDA Lisbon 2012 – Annual Convention(0)

The 15th annual convention of the European Power Transmission Distributors Association (EPTDA), a highly acclaimed professional event in the power transmission and motion control industry, is taking place from September 26 to 28 in Lisbon’s leading hotel, the Corinthia Hotel Lisbon, the official host for the Association’s 2012 convention. The EPTDA Annual Conventions provide unparalleled […]

[ Read More → ]
NKE Distributors’ Conference 2012 in Baveno, Italy NKE Distributors’ Conference 2012 in Baveno, Italy(0)

Bearing manufacturer NKE Austria GmbH held its sixth Distributors’ Conference from 31 May to 3 June 2012. Attended by 170 people from 30 countries, the conference was held in the town of Baveno at the Maggiore Lake in northern Italy. Taking place every two years, the event provides NKE’s global business partners with a platform […]

[ Read More → ]
New Way Air Bearings® Chairman and CTO Drew Devitt to Speak at EUSPEN Conference New Way Air Bearings® Chairman and CTO Drew Devitt to Speak at EUSPEN Conference(0)

New Way Air Bearings® Chairman and CTO Drew Devitt Will Present New Technology at the 2012 European Society for Precision Engineering and Nanotechnology Conference. New Way® Air Bearings, the world’s largest manufacturer of porous media air bearing products, announced that its founder Drew Devitt will be presenting new technology for precision film handling in printed […]

[ Read More → ]
ABMA Hosts Lubrication and Wear: Advanced Concepts ABMA Hosts Lubrication and Wear: Advanced Concepts(0)

ABMA hosted the 2012 Lubrication and Wear: Advanced Concepts Course on May 14-16 in Indianapolis, IN. The course took place on the nationally renowned Notre Dame campus and focused on the science of lubrication and wear along with its application in rolling element bearing design. Instructor and Notre Dame Professor, Tim Ovaert, provided insight on […]

[ Read More → ]

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2012 BEARING NEWS All rights reserved.