Subscribe to RSS
Gruetzner
THE PERFECT BOND BETWEEN BEARINGS AND PLASTIC.
Bearings Units
Miniature Bearings
Standard Bearings
Overmolded Bearings
Custom Bearings
England Germany Russia India Turkey SouthAfrica UnitedStates Netherlands Philippines Belgium Australia Brazil Spain China Korean

Industries back to homepage

New Research Report on Wind Turbine Gearbox and Direct Drive Systems Market by MarketResearchReports New Research Report on Wind Turbine Gearbox and Direct Drive Systems Market by MarketResearchReports(0)

New Market Research Report Added in MarketResearchReports.Biz Reports Database Wind Turbine Gearbox and Direct Drive Systems – Global Market Size, Company Share, Gearbox Refurbishments and Key Country Analysis to 2020 Wind Turbine Gearbox and Direct Drive Systems Global Market Size, Company Share, Gearbox Refurbishments and Key Country Analysis to 2020 Summary Wind Turbine Gearbox and […]

[ Read More → ]
Schweiss Doors Introduces Spherical Bearings for Hydraulic One-Piece Doors Schweiss Doors Introduces Spherical Bearings for Hydraulic One-Piece Doors(0)

Schweiss Doors, a provider of bifold and hydraulic one-piece doors, has made another design improvement to its hydraulic one-piece doors with the addition of “spherical” bearings. All Schweiss “Red Power” Hydraulic Doors are now built with spherical bearings. Spherical bearings are used in many industries including in tractor three-point hitches, planters, drawbars, car suspensions, engines, […]

[ Read More → ]
Indonesia`s Krakatau Steel Aiming for Auto Industry Indonesia`s Krakatau Steel Aiming for Auto Industry(0)

Indonesian state steelmaker Krakatau Steel on Wednesday signed a joint venture agreement with Japanese company Nippon Steel & Sumitomo Metal Corporation to build a steel plant that will supply the domestic automotive industry. The joint venture will conduct operations under the name Krakatau Nippon Steel Sumikin, Krakatau Steel said in a statement. There was no […]

[ Read More → ]
German steel industry sees modest recovery in 2013 German steel industry sees modest recovery in 2013(0)

German steel production will return to modest growth next year as companies rebuild stocks and demand from the automotive and engineering sectors picks up, a trade group forecast on Tuesday. Europe’s steel industry has been hit by a slowdown in demand for cars, appliances and new buildings as an austerity drive aimed at reducing budget […]

[ Read More → ]
NSK to make low-cost car bearings in Korea NSK to make low-cost car bearings in Korea(0)

TOKYO (Nikkei) — NSK Ltd. (6471.TO, NPSKY) plans to begin South Korean output of high-precision bearings for automobile transmissions next year at 80% of the production cost in Japan, the Nikkei reports in its Dec. 24 edition. Previously, the company made most of these bearings at its Saitama factory in Japan because they require high-quality […]

[ Read More → ]
Building a stronger UK automotive supply chain Building a stronger UK automotive supply chain(0)

With a resurgent UK automotive sector, now is the time to invest and innovate, says Richard Hall, President Automotive for Schaeffler UK, an engine, transmission and chassis components and systems supplier. The UK automotive sector is hugely important to the UK economy, employing more than 700,000 people and investing over ?1.5 billion in R&D every […]

[ Read More → ]
Global Wind Turbine Gearbox Market to Exceed $8 Billion by 2020, Wind Rotor Blades Drop to 49K Units Installed Global Wind Turbine Gearbox Market to Exceed $8 Billion by 2020, Wind Rotor Blades Drop to 49K Units Installed(0)

The global market for wind turbine gearboxes increased from an estimated $3.2 billion in 2006 to $6.9 billion in 2011 at a CAGR of 16.8%. The gearbox market growth is due mainly to the increasing installations that are to be made in the forecast period. The average cost of a gearbox unit is also expected […]

[ Read More → ]
Heavy lifting – Smaller but stronger gearboxes Heavy lifting – Smaller but stronger gearboxes(0)

Jack-up gearboxes keep drilling platforms well above stormy seas. Jack-up rigs operate for up to 20 years, during which time gearboxes spend up to 2000 hours lifting and lowering vessel platforms. The hundreds of offshore drilling platforms operating along the world’s continental shelves are some of the most expensive structures on the planet – in […]

[ Read More → ]
The fine print – Energy savings in textile printing The fine print – Energy savings in textile printing(0)

In Gujarat, India, textile producers reduce both costs and environmental impact through energy-saving technologies. At the Badra textile market in Ahmedabad, narrow, winding streets are lined with small shops and stands offering every imaginable fabric. Salespeople compete for the attention of women and girls in colourful, beautifully patterned saris; the shoppers point, select and bargain […]

[ Read More → ]
Tracking a star to power a planet Tracking a star to power a planet(0)

The global solar energy market’s unprecedented growth has resulted in the twin challenges of delivering ever-higher performance and at the same time cutting generation costs. SKF has developed specific industry solutions that are designed to deliver lower total cost of ownership by providing a levelized cost of electricity through higher performance, lower maintenance requirements and […]

[ Read More → ]

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2012 BEARING NEWS All rights reserved.