Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

Schaeffler replaces main Trunnion Bearings on BOS Plant Vessels at Tata Steel Port Talbot

Schaeffler UK was part of the team that successfully completed the replacement of the main trunnion bearings on a BOS (Basic Oxygen Steelmaking) plant at Tata Steel Port Talbot.

Schaeffler TaTa


By replacing the drive-side trunnion bearings with split rolling bearings, Schaeffler also helped to save the customer five extra days of work. If solid rather than split bearings had been used, the customer would have had to disassemble the bull gear unit (i.e. the main drive unit for the BOS plant vessel).

TATA Steel Port Talbot has two BOS Steel making vessels (V1 & V2) in operation. The original vessel was installed in the late 1960s by UK company Ashmore, Benson, Pease & Co and was subsequently upgraded in 1991/1992 by Mannesmann Demag, including trunnion bearing replacements. Each vessel has a steel making capacity of 330 tonnes. Loss of operation of a BOS vessel would result in significant lost revenue for Tata Steel.

Simon Life, BOS Plant Departmental Engineer at Tata Steel Port Talbot comments: “The bearing replacement work was very successful. The bearings were fitted to a high standard with expertise provided by Schaeffler throughout the installation process. During the bearing changeover, we encountered several problems with components being damaged and jacking issues. However, all problems were discussed with Tata, Schaeffler engineers and Central Engineering support, and between all parties, solutions were generated, action lists compiled and remedies implemented. Without Schaeffler’s expertise, the bearing change would not have run so smoothly.”

In July 2011, Schaeffler UK received a telephone call from an area works engineer at the BOS Plant, advising of a sudden bearing failure on the non-drive side (NDS) of the V2 BOS plant vessel.

The BOS Plant engineers arranged a meeting and a request was made for two engineers from Schaeffler Germany to be on site at Port Talbot soon afterwards. A meeting subsequently took place at Port Talbot to discuss action plans and how to replace the trunnion bearings.

As Dave Wall, Senior Applications Engineer at Schaeffler UK recalls: “A method statement document was drawn up by Schaeffler UK, which specified the sequence and method to replace the bearings and outline the TATA requirements. Included in this document was a detailed tooling list and a step-by-step procedure for the dismounting and mounting of the drive-side (DS) & non drive-side (NDS) bearings.”

“The standard ‘solid’ bearing on the DS was replaced by a special FAG split spherical roller bearing [SSRB], which is the recommended replacement spare, as this reduces the amount of downtime when installing the replacement bearing. The NDS bearing was to be replaced with a similar solid bearing. In addition, various surrounding components also required replacing, once the secondary damage caused by the bearing failure had been identified,” confirmed Wall.

Removal of the Drive Side bearing

The cutting away of the existing bearing took a total of 36 hours. The distance between the trunnion spacers (bearing seating width) was measured in order to determine the thickness required for two special, TATA designed, split ‘dovetail’ spacers. These were required to ensure that the new split bearing would be correctly secured in place.

The new split SRB inner ring halves with clamping rings, outer ring half and bottom roller cage halves, were fitted without any problems.

Removal of the Non-Drive Side bearing

The original bearing on the NDS had failed during operation, which had caused the BOS converter to drop down. It was now resting on the bearing housing and the housing covers.

Scheaffler TATA

After lifting, parts of the damaged bearings were removed, including cage pieces; outer and inner ring fragments and rolling elements. All the components were sent for forensic examination to TATA Central Engineering Metallurgy & Inspection Dept. The housing back cover, bearing pressure plate and sleeve spacer were found to be seriously damaged. New ones had to be urgently manufactured by Tata Steel’s Central Engineering Shops (CES). The bearing inner ring had disintegrated and the sleeve had to be cut off due to its deformed shape. After removing the damaged bearing, it was also discovered that the trunnion back spacer was in need of repair. Again, machining work was urgently carried out by CES.

Due to the subsequent damage to the bearing housing, Schaeffler expertise was required to manually repair this surface to restore it back to an acceptable condition.

During the dismounting process the NDS Ladder Expansion Bearing Rollers had to be replaced. To facilitate the Ladder Roller replacement and installation of a TATA manufactured solid inner bearing housing cover, the bottom half of the housing had to be moved away from the journal using specially manufactured crossbeams.

Mounting of the new Non-Drive Side bearing

The new bearing was first pre-mounted to determine the correct sleeve spacer width. The bottom half of the housing was then moved back into position and the crossbeam construction removed.

Mounting of the new bearing was challenging, as the collapse of the original bearing had caused the vessel to move out of alignment.

The lowering of the converter was also a challenge as the vessel had to be moved sideways by 40mm to achieve the correct installation position. Side shifting was initially a problem for the vessel lifting contractor but the problem was successfully overcome.

Final mounting steps for the NDS and DS bearings

For the DS bearing, the remaining roller cage and outer ring halves were installed. For both bearings, the housing caps were fitted and each bearing was 100 per cent filled with grease, including the surrounding free space.

The housing covers were bolted in position and new seals with their tensioning devices were fitted. After having successfully completed the work in under 2 weeks, Schaeffler engineers were pleased to be leaving behind a very happy customer.

After the bearings were installed, the work didn’t finish there. Schaeffler UK prepared a recommended practical maintenance schedule list and forwarded this to the BOS Engineers, which was well received. In addition, customer “as built” cross-sectional drawings were updated to show the actual parts (with measurements) now in place at V2. Schaeffler UK participated and contributed to the Bearing Failure Review meetings with Tata Steel that followed the bearing replacement for the BOS vessels.

“Since replacing the trunnion bearings, engineers from Schaeffler UK have also supervised two further BOS vessel bearing changes in a very short timeframe of just two months: Converter C at SSI UK / Teesside and Converter 1 at Tata Steel Port Talbot. Schaeffler has now been selected as the preferred supplier of main trunnion bearings for the two BOS plant vessels at Tata Steel Port Talbot,” confirms Dave Wall.

For more information, please call the Schaeffler UK Marketing Department on 0121 313 5870. Alternatively, email info.uk@schaeffler.com.

 

source: Schaeffler

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

Century Cement,  Revolvo의 분할 롤러 베어링에 큰 만족감 보여

Century Cement, Revolvo의 분할 롤러 베어링에 큰 만족감 보여(0)

Century Cement는 최근 Row Mill 모터드라이브에 분할 롤러 베어링을 적용하여 성공적인 결과를 거두며 인도 라이푸르에 위치한 공장내, 분할 롤러 베어링의 적용범위를 넓혀가고 있다. 이 회사는 과거에 인덕션 모터에 적용했던 OE 화이트 메탈 베어링이 심지어 펌프 오일 순환 윤활시스템을 갖추었어도 수명이 너무 짧아, 유지보수비용을 절감할 솔루션을 찾지 못한다면 기꺼이 새로운 드라이브 시스템의 구매를 고려했었다. Revolve의 판매

향후 베어링 시장 4대 동향

향후 베어링 시장 4대 동향(0)

지난 몇 년 간 산업 전반의 시장 침체와 함께 글로벌 GDP 지수와 밀접한 관련이 있는 베어링 산업도 급격한 수요 감소를 경험하고 있다. 최근 약간의 회복세를 보이긴 하지만, 2008년 재정위기가 시작되면서, 베어링 매출액과 종류의 감소가 지속되고 있다. 하지만 베어링 산업은 지난 몇 년 간의 침체에서 곧 회복될 것으로 전망되고 있다. Global Industry Analysts, Inc. (GIA)는 2018년에

하드드라이브 디스크 검사용 베어링

하드드라이브 디스크 검사용 베어링(0)

The Barden Corporation UK는 박막 코팅 하드 드라이브 디스크의 완전성을 체크하는 엘립소미터(타원분광기) 검열 장비에 장착하기 위한 수퍼 프리시전 베어링 유닛을 동남아시아 지역에 공급해오고 있다. 저 토오크 및 정확한 실행을 특징으로 하는 이번 최신 맞춤 설계 식 베어링 유닛은 스테인레스 강철링과 볼을 통합시켜, 앵글러 컨택트 한, 박편, 겹줄 베어링으로 구성돼 있는 엘립소미터 장비 맞춤식 이다. 이번

QAV Air Bearing, 새 카달로그 출시

QAV Air Bearing, 새 카달로그 출시(0)

미국 에어베어링 제조의 선두주자인 OAV Air Bearing은 최근 에어베어링 신상품 카탈로그를 선보였다. 새 디자인은 에어 붓싱 에서부터 평면 직사각 에어베어링, 롤러 에어베어링, 쓰러스트 에어베어링 및 붓싱, 진공예압형 에어베어링, 에어베어링 어셈블리, 커스텀 에어베어링 및 에어베어링 부품까지를 포함한다. 사용자 친화적인 카탈로그 레이아웃은 사용자의 용이한 정보검색을 돕는 Carter Manufacturing 웹사이트의 정보를 반영한 것이다. 기존의 롤러 및 볼 베어링을

BearingStocks, 공급자와 수요자를 직접연결

BearingStocks, 공급자와 수요자를 직접연결(0)

설립된 지 18개월을 맞는 BearingStocks는 전 세계 베어링 제조업체들과 수요자들이 직접적으로 비즈니스를 수행할 수 있는 장을 열어줌으로써, 베어링 시장에서 그 입지를 굳히고 있다. 현재까지 약1000개 이상의 베어링 공급업체들이 BearingStocks에 등록하여 서로 간 비즈니스는 물론, BearingStockShop에 등록된 700개 이상의 업체들로부터 견적의뢰서를 받고 있다. 베어링 제조업체들은 BearingStocks를 통하여 구매업체들에게 견적서를 바로 보낼 수 있다. 특히, 라틴아메리카 및

더보기

문의사항

Social networks

자주찾는 카테고리

Legal Notice

© 2012 BEARING NEWS All rights reserved.