Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

ZF introduces the ZF 5000 series marine transmission

The new ZF 5000 series transmission features advanced design and technology to meet the changing requirements and demands of ZF Marine customers and survey society organizations. During the development of these transmissions, significant gains have been made with regard to power capacity, and available ratios due to the product improvements incorporated into the new ZF 5000 family.

The ZF 5000 series transmissions are characterized by low noise gear design, pinion friction bearing, excellent shifting comfort and short engagement times, all while providing a large number of variants in a highly compact design. A variety of accessories and low maintenance demands are all in line with the rigorous requirements of engine manufacturers and shipbuilders alike.

The ZF 5300 series offers larger offset and gear ratios of up to 5,5:1. They can be equipped with an additional Power Take In (PTI) and therefore offer a ‘hybrid-ready’ option. The new transmission series is completed by the availability of non-reversible (NR) versions, with either vertical or horizontal offset.

ZF_5000

The ratings of the ZF 5000 series transmission are aligned to those of the proven ZF 4600 transmission family. The ZF 4600 series has been widely successful over the past 30 years and will gradually exit the ZF Marine product portfolio with the arrival of the new ZF 5000 series.

Replacement units and service parts for the ZF 4600 series will continue to be available through ZF Marine’s aftermarket service network, with over 25 wholly owned Sales and Service Organizations and over 500 authorized worldwide service dealers.

Main features of the ZF 5000 transmission series

  • Improved gear module designs, to meet current and foreseeable international survey society requirements
  • Improved power take-offs designs, for a larger range of SAE hydraulic pump sizes, and easier installation
  • Improved access to regular maintenance points, reducing service time
  • Auxiliary power take in feature (“hybrid ready”) or integral shaft brake option for ZF 5300 design variants
  • Improved main housing strength for reduced stress levels
  • Improved internal cooling circuits for more efficient heat transfer into lubrication oil for demanding applications
  • Replaceable cartridge filter with improved filtration capabilities
  • Electric clutch actuation as standard
  • Improved shift quality (with slip range in Autotroll up to lock up)
  • Dynamic Positioning ready
  • More models to choose from for specific power levels
  • Control Switch for “emergency mode active” signal
  • More environmentally friendly: materials, surface treatments, and reduced oil capacity
  • Non-reversing two shaft gearbox versions horizontal or vertical offset
  • Diagonal offset reversing gearbox versions

source: ZF

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

Century Cement,  Revolvo의 분할 롤러 베어링에 큰 만족감 보여

Century Cement, Revolvo의 분할 롤러 베어링에 큰 만족감 보여(0)

Century Cement는 최근 Row Mill 모터드라이브에 분할 롤러 베어링을 적용하여 성공적인 결과를 거두며 인도 라이푸르에 위치한 공장내, 분할 롤러 베어링의 적용범위를 넓혀가고 있다. 이 회사는 과거에 인덕션 모터에 적용했던 OE 화이트 메탈 베어링이 심지어 펌프 오일 순환 윤활시스템을 갖추었어도 수명이 너무 짧아, 유지보수비용을 절감할 솔루션을 찾지 못한다면 기꺼이 새로운 드라이브 시스템의 구매를 고려했었다. Revolve의 판매

향후 베어링 시장 4대 동향

향후 베어링 시장 4대 동향(0)

지난 몇 년 간 산업 전반의 시장 침체와 함께 글로벌 GDP 지수와 밀접한 관련이 있는 베어링 산업도 급격한 수요 감소를 경험하고 있다. 최근 약간의 회복세를 보이긴 하지만, 2008년 재정위기가 시작되면서, 베어링 매출액과 종류의 감소가 지속되고 있다. 하지만 베어링 산업은 지난 몇 년 간의 침체에서 곧 회복될 것으로 전망되고 있다. Global Industry Analysts, Inc. (GIA)는 2018년에

하드드라이브 디스크 검사용 베어링

하드드라이브 디스크 검사용 베어링(0)

The Barden Corporation UK는 박막 코팅 하드 드라이브 디스크의 완전성을 체크하는 엘립소미터(타원분광기) 검열 장비에 장착하기 위한 수퍼 프리시전 베어링 유닛을 동남아시아 지역에 공급해오고 있다. 저 토오크 및 정확한 실행을 특징으로 하는 이번 최신 맞춤 설계 식 베어링 유닛은 스테인레스 강철링과 볼을 통합시켜, 앵글러 컨택트 한, 박편, 겹줄 베어링으로 구성돼 있는 엘립소미터 장비 맞춤식 이다. 이번

Roller bearings for the High Roller

Roller bearings for the High Roller(0)

The American Bridge Company has contracted SKF to supply technological solutions for the Las Vegas High Roller, soon to be the world’s tallest Ferris wheel. SKF is providing Caesars Entertainment Corporation’s 170-metre-tall Ferris wheel with two custom-designed spherical roller bearings along with related technologies. The two spherical roller bearings weigh approximately 8.8 tonnes each, with

Schaeffler replaces main Trunnion Bearings on BOS Plant Vessels at Tata Steel Port Talbot

Schaeffler replaces main Trunnion Bearings on BOS Plant Vessels at Tata Steel Port Talbot(0)

Schaeffler UK was part of the team that successfully completed the replacement of the main trunnion bearings on a BOS (Basic Oxygen Steelmaking) plant at Tata Steel Port Talbot. By replacing the drive-side trunnion bearings with split rolling bearings, Schaeffler also helped to save the customer five extra days of work. If solid rather than

더보기

문의사항

Social networks

자주찾는 카테고리

Legal Notice

© 2012 BEARING NEWS All rights reserved.